Lomelt ® Flux Powder

Recommended for:

• Used for brazing of steel, stainless steel, copper, copper alloys.
• Induction heating.
• fast heating cycles.
• Most suitable for tight fit joints.
• Activity range: 450 - 750°C.

Description and Flux characteristics:

• Lomelt® is a low temperature silver brazing powder flux.
• Excellent capillary & Fluidity.
• High activity short to medium life flux.
• Can be mixed with water to make paste.

General information:

• Proprietary flux formulation. * Used with BAg (High silver content alloys) group alloys.
• Flux removal: Flux residues left by this are corrosive and must be removed from brazed joint area. After brazing clean flux residues from brazed joint by soaking & and then brushing under hot water.
• Standard packing: 500gms.