+(91)-9850840410

Mr. Aniruddha Joshi

Facebook    Twitter

Our Products

Silver Brazing White Fluxes

Silver Branzing White Fluxes Brazing Fluxes Products Home


Silver Brazing White Fluxes Are Available As Per Aws, Din or to Customers Specifications In Form of Smooth Cremy Paste & Fine Powder With Out Coarse Crystals.

Lomelt Powder

Lomelt Powder

A general purpose low melting flux for use when brazing copper, bronzes, brasses, stainless & carbon steels

Its promotes excellent capillary & fluidity for tight fit joints

Excellent in hot rodding application.

Can be mixed with water to make a paste.

General Properties

International standard : EN 1045 FH 10
Activity range : 450˚c - 800˚c
Activity : medium Life : short
Fluidity : excellent Capillary : Excellent
Flux residues : corrosive
Flux removal : Hot diluted caustic soda dip or wire brush with hot water (60˚c) is recommended
Standard packaging (kg) : 0.25, 0.5, 4.0, 10.0,
For use when brazing with high silver BAg group (42%-50%) & BCuP group brazing alloys. For torch brazing application.

Lomelt 55 Powder

Lomelt 55 Powder

A general purpose slight high temperature flux for use when brazing copper, bronzes, brasses, stainless & carbon steels, nickel & nickel alloys.

Excellent wetting & heat resistance properties.

Most suitable for production work with induction heating brazing.

For application where a dry flux is required.

Can be mixed with water to make a cream paste.

General Properties

International standard : AWS FB3-F
Activity range : 568˚c - 850˚c
Activity : Good Life : Good
Fluidity : Good Capillary : Excellent
Flux residues : corrosive
Flux removal : Hot diluted caustic soda dip or wire brush with hot water (60˚c) is recommended
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,
For use when brazing with BAg group with cadmium & cadmium free silver brazing alloys. To be used with torch & induction heating brazing.

Lomelt 57 Paste

A all purpose flux for universal uses brazing copper, bronzes, brasses, stainless & carbon steels, carbide, nickel & nickel alloys.

Dissimilar metals in the above group can be easily brazed

Suitable for tight fit joints as well as loose fit joints for surface.

General Properties

International standard : EN 1045 FH 10
Activity range : 550˚c - 800˚c
Activity : Good Life : Good
Fluidity : Good Capillary : Good
Flux residues : Corrosive
Flux removal : For use when brazing with silver BAg group (30%-45%) & BCuP group brazing alloys. For torch, induction, furnace heating brazing
Standard packaging (kg) :0.25, 0.5, 5.0, 10.0,
For use when brazing with silver BAg group cadmium bearing, cadmium free & BCuP group brazing alloys. For torch, induction, furnace brazing application.

Lomelt 58 Paste

Lomelt 58 Paste

A new generation smooth creamy flux used when brazing copper, bronzes, brasses, stainless & carbon steels, carbides, hard metals, nickel & nickel alloys.

A highly concentrated flux is fully active at 600˚c above and effective with liquids up to 870˚c.

Perfect wetting action on even heating without spattering or running.

General Properties

International standard : EN 1045 FH 10
Activity range : 500˚c - 870˚c
Activity : Good Life : Good
Fluidity : Excellent Capillary : Excellent
Flux residues : Corrosive
Flux removal : Hot diluted caustic soda dip or wire brush with hot water (60˚c) is recommended
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,
For use when brazing with silver BAg group cadmium bearing, cadmium free & BCuP group brazing alloys. For torch, induction, furnace brazing application.

Lomelt 60 Paste

Lomelt 60 Paste

A special purpose flux used when brazing stainless & carbon steels, carbides, heat resistant alloys.

Highly active in dissolving refectory oxide.

Excellent wetting action.

Promotes optimal alloy bonding.

Suitable for tight fit joints as well as loose fit joints for surface building and gap fillings.

General Properties

International standard : EN 1045 FH 10
Activity range : 500˚c - 800˚c
Activity :Excellent Life : Good
Fluidity : Good Capillary : Good
Flux residues : Corrosive
Flux removal : Hot diluted caustic soda dip or wire brush with hot water (60˚c) is recommended
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,
For use when brazing with high silver BAg group (30%-45%) & BCuP group brazing alloys. For torch & induction brazing.

Lomelt 65 Paste

Lomelt 65 Paste

A special purpose flux used when brazing copper, bronzes, brasses, stainless & carbon steels, nickel.

Flux for medium to low silver content brazing alloys.

A special composition flux for high volume production.

Promotes optimal alloy bonding.

High heat resistance.

General Properties

International standard : EN 1045 FH 10
Activity range : 570˚c - 850˚c
Activity : Good Life : Good
Fluidity : Good Capillary : Excellent
Flux residues : Corrosive
Flux removal : Hot diluted caustic soda dip or wire brush with hot water (60˚c) is recommended
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,
For use when brazing with BAg (20% - 30%) silver group having liquids between 700˚c to 825˚c. for torch & induction brazing.

Bookmark Us Bookmark Us

Refer to Friends Refer to Friends